The maximum hyperbolic polyhedron volume is found to be the rectification of its skeleton.
problem Finding the maximum volume of hyperbolic polyhedra with given combinatorics.
method Applying a volume-increasing flow to any hyperbolic polyhedron, handling degeneracies carefully.
result The supremum volume is always the volume of the rectification of the 1-skeleton.
In this paper we investigate how the volume of hyperbolic manifolds increases under the process of removing a curve, that is, Dehn drilling. If the curve we remove is a geodesic we are able to show that for a certain family of manifolds the volume increase is bounded above by π⋅l where l is the length of the g…
MiFID II impacts European stock liquidity and price formation.
problem Impact of MiFID II on European stock liquidity and price formation.
method Analyzed effects of MiFID II on European stock markets, focusing on intraday and closing auction liquidity and tick size changes.
result Closing auction volumes increased and price formation became more efficient after MiFID II.
A simple learning agent learns to trade in an agent-based market model.
problem Optimal execution of trades in an agent-based financial market model.
method Asynchronous trading through a matching engine, varying initial order sizes and state spaces, calibration of empirical stylized facts and price impact curves.
result Smaller state space agents converge faster in learning and can trade intuitively using spread and volume states.
Market crowd trading behavior and volume impact stock prices in China.
problem Little known about the role of trading volume in market behavior.
method Adaptive hypotheses tested on Chinese stock market data.
result Market crowd trades efficiently and achieves agreement on prices.
Space exploration technology advances exponentially, consistent with Moore's and Wright's laws.
problem Predicting the advancement of space exploration technology.
method Analysis of Moore's and Wright's laws applied to space exploration technology.
result Spacecraft technology advances exponentially, consistent with Moore's and Wright's laws.
This paper introduces a new metric to improve the performance of AMMs over centralised exchanges.
problem Lack of a precise metric to compare AMM performance with centralised exchanges.
method Introduces Rebalancing-versus-Rebalancing (RVR) to measure AMM performance more accurately.
result AMMs can offer superior execution and rebalancing efficiency compared to centralised exchanges, even with low fees.
New flows introduced for symplectic geometry.
problem No specific problem stated; focuses on new flows.
method Introduces several geometric flows on symplectic manifolds.
result Examples include the Hitchin gradient flow and dual Ricci flow.
The paper examines Ricci flows with closed and smooth tangent flows, proving uniqueness and characterizing ancient flows.
problem Characterizing and understanding Ricci flows with closed and smooth tangent flows.
method Analyzing ancient and finite-time singularity Ricci flows to prove uniqueness and characterizations.
result The tangent flow is unique and characterizes ancient and finite-time singularity flows.
Proves uniqueness of geometric flow in various Riemannian manifolds.
problem Proving uniqueness of geometric flow in general Riemannian manifolds.
method Two backward uniqueness theorems for extrinsic geometric flow.
result Backward uniqueness of extrinsic geometric flow in general ambient manifolds.
Study of twisted Calabi flow connecting J-flow and Calabi flow on Kähler manifolds.
problem Existence and convergence of twisted Calabi flow on compact Kähler manifolds.
method Analysis of a family of twisted Calabi flows connecting J-flow and Calabi flow, showing long-time existence and convergence to cscK metrics.
result Long-time existence and convergence of twisted Calabi flow to cscK metrics, implying openness of continuity method.
Investigate scalar curvature under geometric flows
problem Behavior of scalar curvature under geometric flows
method Three specific cases: Ricci flow, Kähler-Ricci flow, Laplacian flow
result Long-time existence of flows
Streets and Tian introduced pluriclosed flow and symplectic curvature flow in recent years. Here we construct a curvature flow to unify these two flows. We show the short time existence of our flow and exhibit an obstruction to long time existence.
We consider four extended Ricci flow systems---that is, Ricci flow coupled with other geometric flows---and prove dynamical stability of certain classes of stationary solutions of these flows. The systems include Ricci flow coupled with harmonic map flow (studied abstractly and in the context of Ricci flow on warped pr…
i-flow uses normalizing flows for high-dimensional integration and sampling.
problem High-dimensional integration in science and statistics.
method Normalizing flows for bijective mappings between distributions.
result i-flow outperforms other algorithms for high-dimensional correlated integrals.
The article calculates the F-convergence rate for Ricci flows with closed and smooth tangent flows.
problem Analyzing the convergence rate of Ricci flows with specific tangent flows.
method Calculating the F-convergence rate for Ricci flows with closed and smooth tangent flows. result A Ricci flow with closed and smooth tangent flow is ∣logλ∣−θ close to its tangent flow in the F-sense. Paper introduces Tensor Gauge Flow Models for better data encoding.
problem Lack of expressive flow dynamics in existing Generative Flow Models.
method Incorporates higher-order Tensor Gauge Fields into the Flow Equation.
result Tensor Gauge Flow Models achieve improved generative performance.
Study K-R flow on Hirzebruch surfaces, showing tangent flows are K-R flows with orbifold singularities.
problem Finite time singularities in Kähler-Ricci flow on Hirzebruch surfaces.
method Analyze tangent flows based at singular points.
result Tangent flows are K-R flows with orbifold singularities.
Ancient curve shortening flows have entropy and curvature bounds equivalent.
problem Bounding entropy and total curvature for ancient curve shortening flows.
method Equivalence of entropy and total curvature conditions for ancient curve shortening flows.
result Entropy and total curvature bounds are equivalent for ancient curve shortening flows.
The study disproves rotating ancient flows in 4D space.
problem The existence of rotating ancient flows in R4. method Analysis of ancient noncollapsed flows in R4. result Nonexistence of rotating ancient flows among ancient noncollapsed flows in R4. New flow preserves almost Hermitian metrics for manifold study.
problem Curvature flow for almost Hermitian manifolds.
method Introducing a new curvature flow matching Ricci flow and preserving almost Hermitian condition.
result Ricci flow can be used to study almost Hermitian manifolds.
Simplifies residual flows to make flow-based modeling more practical.
problem Extremely high computational cost of residual flows limits their applicability.
method Introduces Quasi-Autoregressive (QuAR) approach to residual flows.
result Significantly reduces compute time and memory requirements for flow-based modeling.
Existence of translating solutions shown for curve diffusion flow.
problem Existence of translating solutions for curve diffusion flow.
method Higher order curve shortening flow approach.
result Properly immersed translating solutions exist.
Modeling bone microarchitecture adaptation using geometric flows.
problem Bone microarchitecture adaptation modeling.
method Advection and mean curvature flow model with a sphere as a test case.
result Closed-form solution for sphere under advection and mean curvature flow.
Variational inference relies on flexible approximate posterior distributions. Normalizing flows provide a general recipe to construct flexible variational posteriors. We introduce Sylvester normalizing flows, which can be seen as a generalization of planar flows. Sylvester normalizing flows remove the well-known single…
The Hodge star mean curvature flow on a 3-dimension Riemannian or pseudo-Riemannian manifold, the geometric Airy flow on a Riemannian manifold, the Schrodingier flow on Hermitian manifolds, and the shape operator curve flow on submanifolds are natural non-linear dispersive curve flows in geometric analysis. A curve flo…
The study examines mass drop and multiplicity in mean curvature flow.
problem Analyzing mass drop and multiplicity in mean curvature flow.
method Defined Brakke flow with variational inequality, proved mass drop conditions.
result Mass drop and multiplicity one conjecture are equivalent for Brakke flows.
We explore the harmonic-Ricci flow---that is, Ricci flow coupled with harmonic map flow---both as it arises naturally in certain principal bundle constructions related to Ricci flow and as a geometric flow in its own right. We demonstrate that one natural geometric context for the flow is a special case of the locally …
Using the conformally invariant Cotton tensor, we define a geometric flow, the "Cotton flow", which is exclusive to three dimensions. This flow tends to evolve the initial metrics into conformally flat ones, and is somewhat orthogonal to the Yamabe flow, the latter being a flow within a conformal class. We define an en…
The paper studies mean curvature flow in a Ricci flow background with extended Ricci flow.
problem Analyzing mean curvature flow in a Ricci flow background.
method Computing variational properties and deriving evolution equations for mean curvature and second fundamental form.
result Established a Huisken's monotonicity-type formula for mean curvature solitons in an extended Ricci flow.
Mean curvature flow is not a gradient flow on two nondegenerate metric spaces.
problem Whether mean curvature flow is a gradient flow on nondegenerate metric spaces of simple closed plane curves.
method Examined two nondegenerate metric spaces: uniformness-preserving and curvature-weighted structures.
result Mean curvature flow is not a gradient flow on either metric space.
New derivation of Type IIA flow metrics.
problem Flow of metrics in Type IIA theory.
method Adapted to Laplacian flow, uses projected Levi-Civita connection.
result New derivation of flow equations.
Survey of geometric flows from unified string theories.
problem None explicitly stated, but related to understanding geometric flows in string theories.
method Survey of geometric flows in various geometries (complex, almost-complex, symplectic) motivated by string theories.
result Intermediate flows between Ricci and Kähler-Ricci flows, often coupled to additional fields.
SurVAE Flows combine VAEs and flows using surjective transformations.
problem Combining the strengths of VAEs and flows to model complex densities.
method Modular framework of composable deterministic and stochastic transformations.
result Exact likelihood computation and lower bound on likelihood.
Study describes global existence and convergence of flows on surfaces and fibrations.
problem Global existence and convergence of flows on surfaces and fibrations.
method Complete description of Ricci-Yang-Mills flow and pluriclosed flow on Tk bundles over Riemann surfaces. result Equivalence of solutions to generalized Ricci flow and pluriclosed flow with symmetry.
Gauge Flow Models use a learnable Gauge Field in Generative Flow Models.
problem Improving generative model performance.
method Integrates a learnable Gauge Field into Flow ODEs.
result Gauge Flow Models outperform traditional Flow Models in Flow Matching experiments.
By the method of discrete Morse flows, we construct an energy reducing multiple-valued function flow. The flow we get is Holder continuous with respect to the L-2 norm. We also give another way of constructing flows in some special cases, where the flow we get behaves like ordinary heat flow.
Higher Gauge Flow Models integrate higher geometry and symmetries into Generative Flow Models.
problem Improving generative models' performance.
method Integrates L∞-algebra into Generative Flow Models, leveraging higher geometry and symmetries. result Substantial performance improvements on Gaussian Mixture Model datasets.
A new geometric flow K-flow on 3-manifolds shrinks or preserves homogeneous spheres.
problem Analyzing the behavior of Thurston's model geometries under the K-flow. method Defining and studying the K-flow on 3-dimensional Riemannian manifolds, using a DeTurck-type argument for short-time existence. result The K-flow shrinks or preserves homogeneous spheres, showing short-time existence. New perspective on G2-structures flow from DeTurck Laplacian.
problem Understanding G2-structures and their flows.
method Introducing a new flow (DeTurck Laplacian flow) for G2-structures.
result DeTurck Laplacian flow is a flow of G2-structures.
Study G2-flows reducing to complex geometry flows, focusing on G2-anomaly and G2-Laplacian coflow.
problem Investigate flows of G2-structures in relation to complex geometry. method Analyze G2-Laplacian coflow and G2-anomaly flow, compare their properties. result Compare G2-anomaly flow to G2-Laplacian coflow, investigate short-time existence and fixed points. Smooth flows with surgery approximate weak mean curvature flows with spherical and neck-pinch singularities.
problem Approximating weak mean curvature flows with singularities using smooth flows.
method Combining Choi-Haslhofer-Hershkovits and Choi-Haslhofer-Hershkovits-White work on canonical neighbourhoods and barriers to flows with surgery.
result Smooth flows with surgery can approximate weak mean curvature flows with spherical and neck-pinch singularities.
Study on Gaussian interpolation flows for generative modeling.
problem Theoretical properties and regularizing effect of Gaussian denoising in continuous normalizing flows.
method Unified framework of Gaussian interpolation flow, Lipschitz regularity, existence and uniqueness of flow, stability analysis.
result Established theoretical properties of Gaussian interpolation flows, including Lipschitz continuity and existence of flow.
The study examines singularities in flows with curvature bounds and identifies unique tangent flows.
problem Analyzing singularities in mean curvature flows with curvature bounds.
method Examines tangent flows and uses stationary and area-minimizing cones to identify unique flows.
result For flows with H∈L∞Llocp, the tangent flow is unique when p=∞ and C is a regular cone. The paper shows bounds for a geometric flow related to Type IIB string theory.
problem Establishing derivative bounds for a geometric flow in non-Kähler geometry.
method Unified formulation of the flow with Ricci flow, proving bounds from metric and torsion 1-form uniform bounds.
result Derivative bounds follow from uniform metric and torsion 1-form bounds.
New method shows pseudo-Anosov flows on graph manifolds can be simplified.
problem Understanding pseudo-Anosov flows on graph manifolds.
method Constructing a partial Birkhoff section with genus one components that misses finitely many closed orbits.
result Every pseudo-Anosov flow on a graph manifold is almost equivalent to a totally periodic flow or a suspension Anosov flow.
Survey on Chern-Ricci flow for complex manifolds.
problem Understanding and solving open problems in Chern-Ricci flow.
method Parabolic flow of Hermitian metrics on complex manifolds.
result Open problems and new directions in Chern-Ricci flow highlighted.
Study mean curvature flow into evolving manifold with coupled flows.
problem Analyzing mean curvature flow in evolving Riemannian manifolds.
method Coupling Ricci flow and harmonic map heat flow, calculating variations, and using Harnack expressions.
result Obtained a Huisken monotonicity-type formula for mean curvature flow.