Deep learning identifies cervical spondylosis from sEMG signals.
problem Early identification of cervical spondylosis for improved cure rate and reduced costs.
method Convolutional neural network-based multi-channel algorithm.
result Significant improvement in CS identification compared to previous methods.
Hidden Markov Models detect hand gestures from wearable sEMG signals.
problem Detecting activity regions in continuous sEMG signals.
method Hidden Markov Models applied to sEMG signals for gesture recognition.
result Average accuracy of 96.25% for activity onsets and 87.5% for activity terminations.
Deep-learning method improves sEMG-based gesture recognition accuracy.
problem Inter-session and inter-subject variances in sEMG-based gesture recognition.
method Recurrent Neural Networks and Domain Adaptation method.
result Our approach outperforms state-of-the-art methods in recognition accuracy.
EasiCS improves neck function assessment by objectively classifying cervical spondylosis.
problem Subjective and coarse-grained neck function assessment methods.
method Developed clustering algorithms on sEMG data to objectively classify cervical spondylosis.
result EasiCS outperforms existing seven algorithms overall.
Dual-stage sEMG classification improves gesture recognition accuracy.
problem Improving accuracy in hand gesture recognition from sEMG signals.
method Dual-stage classification approach: first stage groups similar activities, second stage classifies within groups.
result Dual-stage classification yields significantly higher accuracy than single-stage approach.
New sEMG dataset for ADL activities recognized with high accuracy.
problem Developing a robust dataset for sEMG-based ADL activity recognition.
method Acquired sEMG data from 25 subjects performing 22 ADL activities. Used 4 classifiers with various feature sets.
result SVM classifier achieved 83.21% accuracy on 5 FAABOS categories.
Simple attention model outperforms complex sEMG classifiers.
problem Improving myoelectric control for robotic prosthetics.
method Attention-based model for sEMG signal classification.
result Simple model achieves benchmark results on multiple datasets.
Deep neural networks improve sEMG-based hand gesture classification.
problem Accurate classification of hand gestures from sEMG signals.
method Master-slave architecture with DNNs and synthetic feature data.
result Up to 9% improvement in accuracy with synthetic data.
Spinal cord stimulation has enabled humans with motor complete spinal cord injury (SCI) to independently stand and recover some lost autonomic function. Quantifying the quality of bipedal standing under spinal stimulation is important for spinal rehabilitation therapies and for new strategies that seek to combine spina…
Study provides long-term EMG data for multi-day biometric authentication.
problem Limited long-term EMG data for multi-day biometric authentication.
method Collected EMG data from 43 participants over three days.
result Multi-day biometric authentication results in low error rates.
The link between different psychophysiological measures during emotion episodes is not well understood. To analyse the functional relationship between electroencephalography (EEG) and facial electromyography (EMG), we apply historical function-on-function regression models to EEG and EMG data that were simultaneously r…
XceptionTime improves hand gesture recognition accuracy using novel deep learning.
problem Improving hand gesture recognition from sparse sEMG signals.
method Depthwise separable convolutions, adaptive pooling, non-linear normalization.
result Significantly improved accuracy (5.71% improvement) in hand gesture recognition.
We present a comprehensive study of the use of generative modeling approaches for Multiple-Instance Learning (MIL) problems. In MIL a learner receives training instances grouped together into bags with labels for the bags only (which might not be correct for the comprised instances). Our work was motivated by the task …
Bayes-CATSI uses variational Bayesian deep learning for medical time series data imputation.
problem Missing values in medical time series data.
method Bayes-CATSI integrates variational inference for uncertainty quantification and context-aware imputation.
result Bayes-CATSI outperforms CATSI by 9.57% in imputation performance.
Model classifies hand gestures with low EMG samples augmented with noise.
problem Classify hand gestures with limited EMG data.
method Random variance Gaussian noise augmentation, Random Forest, XGBoost.
result High accuracy model for six hand gestures.
In recent years, deep learning algorithms have become increasingly more prominent for their unparalleled ability to automatically learn discriminant features from large amounts of data. However, within the field of electromyography-based gesture recognition, deep learning algorithms are seldom employed as they require …
New dataset improves EMG gesture recognition accuracy.
problem Discrepancy between offline and online EMG gesture recognition accuracy.
method Recorded dynamic dataset using virtual reality and EMG-independent controller.
result TADANN algorithm consistently outperforms fine-tuning for long-term gesture recognition.
Study of cuspidal edges on focal surfaces of regular surfaces.
problem Clarifying the sign of singular curvature at cuspidal edges.
method Investigation using singularities of parallel surfaces.
result Clarification of the sign of singular curvature at cuspidal edges.
New method glues Scherk surfaces into minimal surfaces, limiting possible outcomes.
problem Limiting the outcomes of gluing Scherk surfaces into minimal surfaces.
method Constructing minimal surfaces by stacking and gluing doubly periodic Scherk surfaces.
result Except for special cases, gluing more Scherk surfaces results in known minimal surfaces.
Study on focal surfaces of lightcone framed surfaces in Lorentz-Minkowski 3-space.
problem Investigate differential geometry properties of focal surfaces of lightcone framed surfaces.
method Introduced lightcone frame to define lightcone framed surfaces, then investigated their differential geometry properties.
result Investigated differential geometry properties of focal surfaces of lightcone framed surfaces.
Study on focal surfaces of tubular surfaces in 3D space, focusing on their flatness and asymptotic properties.
problem Characterizing and understanding focal surfaces of tubular surfaces in 3D space.
method Defined tubular surfaces using Frenet and Darboux frames, analyzed their focal surfaces, and derived conditions for flatness.
result No minimal focal surface exists in 3D space for tubular surfaces.
Generalizes ribbonness result for surface-links.
problem Characterizing ribbon surface-links.
method Analyzes handle-irreducible summands and uses equivalences.
result Every stable-ribbon surface-link is a ribbon surface-link.
Introduces hyperbolic generalized framed surfaces and their properties.
problem None explicitly stated; focuses on introducing new geometric objects.
method Generalization of hyperbolic framed surfaces and curves.
result Established conditions for a surface to be a hyperbolic generalized framed base surface and explored their singularities.
The paper studies special surfaces with a new type of support function.
problem Characterizing surfaces with a specific quadratic support function.
method Developed a Weierstrass type representation involving holomorphic functions.
result Classified surfaces of rotation with this new type of support function.
Minimal Legendrian surfaces found in 5D sphere.
problem Characterizing Willmore Legendrian surfaces in S5. method Analyzing properties of Willmore and csL Willmore surfaces.
result Complete Willmore Legendrian surfaces in S5 are minimal. The paper studies knitted surfaces and surface-links, showing their isotopy and closure properties.
problem Understanding the isotopy and closure properties of knitted surfaces and surface-links.
method Analyzing the structure and closure of knitted surfaces and surface-links in R4. result Any surface-link is ambient isotopic to the closure of a 2-dimensional knit.
Classifies surfaces with constant Gaussian curvature in Euclidean 3-space.
problem Classifying surfaces with constant Gaussian curvature in Euclidean 3-space.
method Analyzing surfaces as implicit equations and proving properties based on Gaussian curvature.
result Surfaces with constant Gaussian curvature are either surfaces of revolution, cylindrical surfaces, conical surfaces, or have specific forms.
We investigate surfaces with constant harmonic-mean curvature one (HMC-1 surfaces) in hyperbolic three-space. We allow them to have certain kinds of singularities, and discuss some global properties. As well as flat surfaces and surfaces with constant mean curvature one (CMC-1 surfaces), HMC-1 surfaces belong to a cert…
Unstable minimal surfaces in n-space link to hyperbolic products.
problem Characterizing unstable minimal surfaces in Rn and their product counterparts. method Lifting to R-trees, deforming to hyperbolic products, and proving instability equivalence. result Unstable minimal surfaces in Rn imply unstable surfaces in product hyperbolic spaces. Researchers generalize Ribaucour-type surfaces with new mathematical representation.
problem Defining and characterizing new geometric surfaces.
method Developed a new mathematical representation for GRT-surfaces involving holomorphic functions and a real function.
result Explicit examples and classification of GRT-surfaces of rotation.
Automorphisms of fine curve graphs match surface homeomorphisms for planar surfaces.
problem Understanding automorphisms of fine curve graphs on surfaces.
method Analyzing vertices and edges of fine curve graphs to match with surface homeomorphisms.
result Automorphism group of fine curve graphs is naturally isomorphic to the homeomorphism group of boundaryless planar surfaces with at least 7 punctures.
This paper connects Laguerre minimal surfaces to Weierstrass representations.
problem Understanding the relationship between Laguerre minimal surfaces and Weierstrass representations.
method Defining spherical mean curvature and providing Weierstrass-type representations for two classes of surfaces.
result Laguerre minimal surfaces are related to H2-surfaces, providing a new Weierstrass-type representation. New surfaces in 4-ball constructed from knits, described by charts.
problem Constructing surfaces in 4-ball from knits.
method Introducing knitted surfaces, describing them with BMW charts.
result Every compact surface in 4-ball is ambiently isotopic to a knitted surface.
Study on singular points of translation surfaces under linearly dependent conditions.
problem Investigate singular points of translation surfaces under linearly dependent conditions.
method Use theories of generalised framed surfaces and framed surfaces.
result Introduce translation generalised framed surfaces and investigate their singular points.
Crochet patterns for minimal surfaces created using trigonometry.
problem Creating crochet patterns for minimal surfaces.
method Using trigonometric identities to calculate arc lengths.
result Crochet instructions for Enneper's surface.
New surfaces generalize Dini surfaces in 4D.
problem None explicitly stated; focuses on surface generalization.
method Introducing a new family of surfaces in 4D.
result Generalized Dini surfaces exist in 4D.
New method classifies HCMU surfaces in 3D space forms as Weingarten surfaces.
problem Classifying HCMU surfaces in 3D space forms as Weingarten surfaces.
method Totally different method from previous work.
result Criteria for Weingarten surfaces that are also HCMU surfaces.
Minimal surfaces are the only biharmonic in Sol3.
problem Characterizing biharmonic surfaces in Sol3.
method Found local equations for biconservative surfaces and showed all biharmonic surfaces are minimal.
result All biharmonic surfaces in Sol3 are minimal.
This paper proves compactness of conformal Chern-minimal surfaces in Hermitian surfaces.
problem Compactness of conformal Chern-minimal surfaces in Hermitian surfaces.
method Proves compactness through bubble tree limit analysis.
result Compactness of conformal Chern-minimal surfaces is established with bounded area.
New surface class defined using osculating circles.
problem Defining a new surface class in Euclidean space.
method Using osculating circles of curves and classification of specific types.
result Classification of canal and Weingarten surfaces.
Study proves surfaces with constant curvature are simple shapes.
problem Characterizing singular minimal surfaces with constant curvature.
method Proved geometric properties of surfaces with constant curvature.
result Singular minimal surfaces with constant curvature are planes, spheres, and cylindrical surfaces.
The article constructs Bolza-like surfaces for infinitely many genera and studies their properties.
problem Maximizing systole functions in Teichmüller spaces for genus two and higher.
method Defining and constructing Bolza-like surfaces with specific triangulations and properties.
result Global maximal surfaces can be constructed using Bolza-like surfaces, and systolic geodesics intersect at even points.
The Enneper surface and helix surfaces are unique in their geometric properties.
problem Characterizing surfaces with specific geometric properties.
method Analyzing isogonal lines and pseudo-geodesic lines in 3D Euclidean space.
result Helix surfaces and Enneper surface are the only surfaces with isogonal lines as generalized helices and pseudo-geodesic lines.
We address the problem of surface inpainting, which aims to fill in holes or missing regions on a Riemann surface based on its surface geometry. In practical situation, surfaces obtained from range scanners often have holes where the 3D models are incomplete. In order to analyze the 3D shapes effectively, restoring the…
Study on automorphisms of K3 and Enriques surfaces, proving entropy gaps and achirality.
problem Entropy norms and achirality of automorphisms on K3 and Enriques surfaces.
method Proves gap theorems for entropy norms and studies achirality in terms of genus-one fibrations.
result Entropy gaps and achirality results for automorphisms of K3 and Enriques surfaces.
The paper connects least area surfaces to quasi-normal surfaces in 3-manifolds.
problem Understanding the properties of least area surfaces in 3-manifolds.
method Introducing quasi-normal surfaces and showing their relationship to least area surfaces in fine triangulations.
result Least area surfaces in 3-manifolds are quasi-normal with respect to fine triangulations, and this quasi-normality leads to piecewise flat approximations.
New concept of quasi-ribbon surface-links simplifies complex surface-links.
problem Complexity in surface-links of trivial components.
method Introducing quasi-ribbon surface-links as a generalization of ribbon surface-links.
result Every F-link of trivial components on a surface F with at most one aspheric component is a quasi-ribbon surface-link.
Study of timelike surfaces in Minkowski space with specific geometric properties.
problem Characterizing geometric properties of timelike surfaces in Minkowski space.
method Analytical study of two types of timelike general rotational surfaces.
result Explicit descriptions of minimal and surfaces with specific curvature properties.