Data-driven method clusters and analyzes heat load patterns in district heating networks.
problem Lack of knowledge about customers' heat load behaviors in district heating networks.
method Data-driven approach that clusters customer profiles and detects unusual patterns.
result High potential for deploying the method to analyze customers' heat-use habits in practice.
New method predicts heat load in thermal grids using latent variables.
problem Predicting heat load in district energy systems.
method Combines nominal model for outdoor temperature with latent variable model for residual heat load.
result Proposed method achieves better prediction accuracy than artificial neural networks.
Model forecasts hourly electricity demand influenced by weather, socio-economic, and political factors.
problem Accurate hourly electricity demand forecasting in the face of multifaceted uncertainties.
method Interpretable probabilistic mid-term forecasting model using Generalized Additive Models (GAMs).
result Highlights vulnerability of countries to extreme weather scenarios under electric heating adoption.
HIV RNA viral load (VL) is an important outcome variable in studies of HIV infected persons. There exists only a handful of methods which classify patients by viral load patterns. Most methods place limits on the use of viral load measurements, are often specific to a particular study design, and do not account for com…
Enhances load forecasting for multiple entities with dynamic similarities.
problem Inaccurate probabilistic load predictions due to uncertainties and dynamic changes.
method Online multi-task learning for probabilistic load forecasting.
result Significantly enhances load forecasting accuracy across various scenarios.
This paper proposes a submodular load clustering method for transmission-level load areas.
problem Traditional load analysis challenges with new electricity usage patterns.
method Robust Principal Component Analysis (R-PCA) and submodular cluster center selection.
result The proposed method efficiently clusters load areas and demonstrates effectiveness in PJM load data.
Paper presents a method for probabilistic load forecasting using adaptive online learning.
problem Inability to assess intrinsic uncertainties and capture dynamic changes in consumption patterns.
method Adaptive online learning of hidden Markov models for recursive parameter updates and sequential prediction.
result Significant improvement in performance compared to existing techniques across various scenarios.
New model identifies anticyclonic patterns causing drought and heat.
problem Identifying atmospheric drivers of drought and heat.
method Smoothed convolutional neural network classifier for anticyclonic circulations.
result Helps identify important drivers of hot and dry extremes in climate simulations.
Adaptive probabilistic load forecasting improves performance in power systems.
problem Complexity of electricity load forecasting due to changing drivers and local generation.
method Adaptive probabilistic approach using Kalman filter and online gradient descent.
result Adaptive probabilistic forecasts improve performance in both point and probabilistic forecasting.
We present a methodology for probabilistic load forecasting that is based on lasso (least absolute shrinkage and selection operator) estimation. The model considered can be regarded as a bivariate time-varying threshold autoregressive(AR) process for the hourly electric load and temperature. The joint modeling approach…
Hierarchical clustering models capture electricity load patterns from smart meters.
problem Improving efficiency and sustainability of electricity systems.
method Quantile autocovariances and autocorrelations for summarizing time series.
result Clusters identify relevant consumption behaviors and capture geo-demographic segmentation.
Paper proposes a new method for hourly load forecasting using smart meter data.
problem Challenges in short-term load forecasting at fine granularity.
method Forecasting using Matrix Factorization (fmf) for hourly load forecasting.
result Significantly outperforms state-of-the-art methods in load forecasting.
Restricted Boltzmann Machines are described by the Gibbs measure of a bipartite spin glass, which in turn corresponds to the one of a generalised Hopfield network. This equivalence allows us to characterise the state of these systems in terms of retrieval capabilities, both at low and high load. We study the paramagnet…
Several statistical and machine learning methods are proposed to estimate the type and intensity of physical load and accumulated fatigue . They are based on the statistical analysis of accumulated and moving window data subsets with construction of a kurtosis-skewness diagram. This approach was applied to the data gat…
Novel probabilistic models forecast residential heating and electricity demand at hourly resolution.
problem Accurate hourly forecasting of residential heating and electricity demand.
method Probabilistic deep learning models trained on gas-heated region data.
result Significant improvement in forecast accuracy compared to NREL's ResStock model.
Consumer Demand Response (DR) is an important research and industry problem, which seeks to categorize, predict and modify consumer's energy consumption. Unfortunately, traditional clustering methods have resulted in many hundreds of clusters, with a given consumer often associated with several clusters, making it diff…
Minimal DAMs can recognize patterns in high noise, even with minimal data.
problem Pattern recognition in high noise conditions with limited data.
method Interpolating between DAMs and spin glasses, using minimal dense associative networks and extremizing quenched free-energy.
result Minimal DAMs can correctly recognize patterns even when the signal is very weak and noise is high.
The paper uses pattern similarity-based methods for mid-term electricity demand forecasting.
problem Forecasting monthly electricity demand with seasonal patterns.
method Pattern similarity-based machine learning models (nearest neighbor, fuzzy neighborhood, kernel regression, GRNN).
result The proposed models outperform classical and state-of-the-art models in accuracy and simplicity.
Paper uses tensor completion to estimate HVAC fan power baselines.
problem Estimating HVAC fan power without demand response.
method Tensor completion for multi-dimensional data analysis.
result Tensor completion outperforms existing baselining methods.
Model uses GAMs to forecast hourly electricity load weeks to one year ahead.
problem Accurate mid-term hourly load forecasting for power plant operation and energy management.
method Generalized Additive Models (GAMs) with P-splines and autoregressive post-processing.
result Significantly enhanced forecasting accuracy compared to state-of-the-art methods.
Adaptive models improve electricity demand forecasting during lockdown.
problem Poor load forecasting due to sudden consumption changes during lockdown.
method Adaptive generalized additive models with Kalman filters and expert aggregation.
result Significant reduction in prediction errors compared to traditional models.
BN^2MF identifies unknown exposure patterns in environmental mixtures.
problem Identifying unknown exposure patterns in environmental mixtures.
method Bayesian non-parametric non-negative matrix factorization (BN^2MF) with non-negative continuous priors and a non-parametric sparse prior.
result Estimates patterns of chemical exposures without specifying the number of patterns.
Bayesian Transformer improves probabilistic load forecasting with calibrated uncertainty estimates.
problem Overconfident point predictions from deep learning models fail under extreme weather distributional shifts.
method Integrates three uncertainty mechanisms: MC Dropout, variational layers, and stochastic attention.
result Achieves state-of-the-art performance with CRPS of 0.0289 and 90% PICP across various horizons.
New LSTM model predicts disaggregated electricity loads accurately.
problem Forecasting disaggregated electricity loads from smart meters.
method Single complex LSTM model capturing individual consumption patterns.
result Model accurately predicts future loads of new consumers.
Paper proposes a novel optimization method for disaggregating smart meter data.
problem Energy disaggregation, inferring appliance-specific energy consumption from aggregate meter data.
method Two-stage optimization approach: first phase uses mixed integer programming, second phase binary quadratic optimization with penalty terms and appliance constraints.
result Proposed method successfully reconstructs appliance signatures, overcoming previous optimization-based methods' limitations.
Motivated by the prediction of cell loads in cellular networks, we formulate the following new, fundamental problem of statistical learning of geometric marks of point processes: An unknown marking function, depending on the geometry of point patterns, produces characteristics (marks) of the points. One aims at learnin…
Airlines optimize fuel loading with better flight time predictions.
problem Flight time uncertainties and their impact on fuel consumption.
method Developed a spatial weighted recurrent neural network model.
result The model provides more accurate flight time predictions, reducing fuel consumption.
This research improves LSTM for monthly electricity demand forecasting using pattern-based methods.
problem Forecasting mid-term monthly electricity demand with high accuracy.
method Developed a hybrid LSTM model using x-patterns and exponential smoothing.
result The hybrid model outperformed standard LSTM and classical models.
This thesis tackles NILM challenges with a new dataset and efficient edge deployment techniques.
problem Limited datasets and high computational power for NILM deployment.
method Developed an interoperable data collection framework and introduced model compression techniques.
result Efficient edge deployment of NILM models for global scalability and sustainability.
CityTFT models urban building energy using a data-driven approach.
problem Current UBEM methods are time-consuming and based on physics.
method CityTFT uses a TFT framework with an augmented loss function.
result CityTFT predicts energy demands with high accuracy.
Neural networks can detect weak patterns hidden in noise.
problem Detecting weak patterns in noisy data.
method Developed a three-layer Sejnowski machine with redundant representation, showing patterns can be stored and retrieved efficiently.
result Neural networks can retrieve information with intensity O(1) even in the presence of noise O(\sqrt{N}) in the large N limit.
Detecting faults and SLA violations in a timely manner is critical for telecom providers, in order to avoid loss in business, revenue and reputation. At the same time predicting SLA violations for user services in telecom environments is difficult, due to time-varying user demands and infrastructure load conditions. In…
A new model decomposes equity returns and volatilities into memory components.
problem Understanding long-term equity dynamics and volatility patterns.
method Proposes a multivariate generalization of the variance ratio to decompose long-horizon equity dynamics.
result Identifies a five-factor model capturing persistent, antipersistent, and multi-scale memory in returns and volatility.
The study improves the perceptron's storage capacity by optimizing variable selection.
problem Distinguishing genuine structure from random correlations in high-dimensional data.
method Replica method from statistical mechanics for optimal variable selection.
result Optimal variable selection can surpass the Cover--Gardner bound for pattern classification.
Accelerates data loading in deep neural network training by 30x.
problem Data loading is a bottleneck in deep neural network training.
method Locality-aware data loading method using software caches.
result More than 30x speedup in data loading.
This paper analyzes load predictability at different aggregation levels and improves forecasting accuracy.
problem Challenges in short-term load forecasting, especially at low aggregation levels.
method Characterized SME and residential loads, quantified predictability using approximate entropy, compared various STLF techniques.
result Improved forecasting accuracy for low-aggregation loads, validated with data processing techniques.
Efficient usage of the knowledge provided by the Linked Data community is often hindered by the need for domain experts to formulate the right SPARQL queries to answer questions. For new questions they have to decide which datasets are suitable and in which terminology and modelling style to phrase the SPARQL query. In…
In (exploratory) factor analysis, the loading matrix is identified only up to orthogonal rotation. For identifiability, one thus often takes the loading matrix to be lower triangular with positive diagonal entries. In Bayesian inference, a standard practice is then to specify a prior under which the loadings are indepe…
This work investigates the use of deep learning to perform user cell association for sum-rate maximization in Massive MIMO networks. It is shown how a deep neural network can be trained to approach the optimal association rule with a much more limited computational complexity, thus enabling to update the association ru…
Simple 1D-CNN network predicts electricity loads 36 hours ahead.
problem Forecasting electricity loads for future time periods.
method Used a one-dimensional CNN with parameter scanning to optimize kernel size, filters, and dense size.
result Good forecast quality achieved with basic CNN architectures.
Geo2DR learns graph representations using substructure patterns.
problem Learning distributed representations of graphs efficiently.
method Unsupervised learning with discrete substructure patterns and neural language models.
result Geo2DR achieves high reproducibility and interoperability in graph classification.
A new framework uses DDQN to simplify WECC CLM for efficient load modeling.
problem Complexity and high parameter count in WECC CLM.
method Two-stage approach with DDQN for load composition and parameter selection.
result The framework efficiently approximates WECC CLM transient responses.
Paper uses econometrics time series model with T-student Distribution for short-term load forecasting.
problem Accurate short-term load forecasting for optimizing electrical sources and protecting energy.
method Uses SARIMA-GARCH model with T-student Distribution to forecast electric load.
result The proposed model outperforms the ARIMA model with Normal Distribution.
Deep learning boosts building energy load forecasting.
problem Short-term load forecasting in buildings.
method Stacked Boosters Network architecture with sparse interactions, parameter sharing, and equivariant representations.
result Outperforms state-of-the-art models in short-term load forecasting tasks.
New method infers viral load from pooled tests.
problem Inefficient viral load inference in pooled testing.
method Message passing algorithm with PCR noise function.
result Accurate viral load inference possible.
We use online convex optimization (OCO) for setpoint tracking with uncertain, flexible loads. We consider full feedback from the loads, bandit feedback, and two intermediate types of feedback: partial bandit where a subset of the loads are individually observed and the rest are observed in aggregate, and Bernoulli feed…
This paper uses a diffusion model to forecast electrical loads with uncertainty.
problem Uncertainties in electrical load forecasting due to renewable energy and external events.
method Diffusion-based Seq2Seq structure for epistemic uncertainty and robust additive Cauchy distribution for aleatoric uncertainty.
result Ability to separate and quantify both types of uncertainties in load forecasting.
Paper proposes dense average network for improved power load forecasting.
problem Improving power load forecasting accuracy to save millions for the power industry.
method Introduces dense average connection and constructs dense average network for power load forecasting.
result Proposed model outperforms existing methods on public datasets.