The paper quantifies fractal curves using centroaffine curvatures.
problem Quantifying the irregularities of fractal curves.
method Using moving frame and centroaffine curvatures.
result Fractal curves can be described by a sequence of affine curvatures.
We investigate the approximate j-dimensionality of the singularity sets of minimal surfaces prescribed by Simon. This leads to the clasification of 8 variations of approximately j-dimensional surfacs in terms of dimension and locally finite Hausdorff measure. We show that the singularity sets must either be well behave…
An analytic approach and description are presented for the moduli cotangent sheaf for suitable stable curve families including noded fibers. For sections of the square of the relative dualizing sheaf, the residue map at a node gives rise to an exact sequence. The residue kernel defines the vanishing residue subsheaf. F…
Uniform proof for Ricci flows on complete manifolds.
problem Proving short-time existence, uniqueness, and continuous dependence for Ricci flows.
method Using Koch-Lamm framework and tensor heat kernel estimates, with a new continuous dependence estimate.
result Uniform proof of short-time existence, uniqueness, and continuous dependence for Ricci flows.
In this paper we introduce a new multivariate dependence measure based on comonotonicity by means of product moment which motivated by the recent papers of Koch and Schepper (ASTIN Bulletin 41 (2011) 191-213) and Dhaene et al. (Journal of Computational and Applied Mathematics 263 (2014) 78-87). Some differences and rel…
We show that every finite volume hyperbolic manifold of dimension greater or equal to 3 is stable under rescaled Ricci flow, i.e. that every small perturbation of the hyperbolic metric flows back to the hyperbolic metric again. Note that we do not need to make any decay assumptions on this perturbation. It will turn ou…
Study shows augmented deformation space of rational maps is disconnected.
problem Understanding the structure of rational maps with specific dynamics.
method Examined the augmented deformation space of a family of quadratic rational maps.
result The closure of the deformation space in the augmented space is also disconnected.
Paper defines spatial risk measures for analyzing extreme events.
problem Risk assessment of extreme environmental events.
method Introduces spatial risk measures and axioms, investigates conditions for asymptotic spatial homogeneity.
result Conditions for spatial risk measures to satisfy asymptotic spatial homogeneity are provided.
Self-similar solutions to geometric flows are stable under small perturbations.
problem Stability of self-similar solutions in geometric flows.
method Global analytic solutions, compactness arguments, spatial equi-decay properties, and estimates of linearized operator.
result Perturbed solutions are asymptotically self-similar as time tends to infinity.
Study quantifies risk of extreme wind events using spatial risk measures.
problem Assessing risk of impacts from extreme wind events.
method Spatial risk measure axioms, Brown-Resnick max-stable random fields, powers of max-stable random fields.
result Spatial risk measures associated with extreme wind speeds satisfy risk measure axioms.
New methods to construct curve pairs and their applications.
problem Constructing curve pairs and their properties.
method Using integral curves to study direction and donor curves.
result New methods to construct partner curves of unit speed curves.
New method to construct partner curves of non-lightlike curves.
problem Constructing partner curves for non-lightlike curves.
method Using integral curves in Minkowski 3-space, direction curve, and donor curve.
result New methods to construct partner curves of a unit speed non-lightlike curve.
The study explores Bertrand and Mannheim curves in 4D Euclidean space for framed curves.
problem Exploring Bertrand and Mannheim curves in 4D Euclidean space for framed curves.
method Defining and investigating Bertrand and Mannheim curves of framed curves in 4D Euclidean space.
result Bertrand and Mannheim curves exist even for framed curves in 4D Euclidean space, contrary to regular curves.
The study examines Bertrand Legendre curves in the unit tangent bundle over Euclidean plane.
problem Investigating properties of Legendre curves and their associated curves.
method Analyzing Bertrand Legendre curves and their associated curves, including parallel, evolute, and involute curves.
result Existence conditions and inverse operation for Bertrand Legendre curves are provided.
Method for generating new curves from plane curves on cylinders.
problem Generating new space curves from given plane curves.
method Defining a non-planar space curve on a right generalized cylinder and examining its focal curve.
result Parametric representation of the focal curve of a cylindrical curve.
The paper characterizes curves in pseudo-Galilean 4-space.
problem Characterizing curves in the pseudo-Galilean 4-space G14. method Investigation and characterisation of admissible curves in terms of curvature functions.
result Necessary and sufficient conditions for admissible rectifying curves in G14. The paper explores Bertrand and framed curves in 3D space.
problem Characterizing Bertrand and framed curves in Euclidean 3-space.
method Analyzing curves where tangent, normal, or binormal lines match another curve's lines.
result Conditions for the existence of Bertrand and framed curves are clarified.
The paper examines how closed curves on surfaces intersect and how this intersection determines the curves.
problem Determining closed curves on surfaces based on their intersections.
method Constructing and studying k-equivalent curves, analyzing intersections with other curves. result Curves are determined by their intersections with all other curves, but non-simple curves require infinitely many intersections to distinguish.
Approximating complex curves with simple parametric curves is widely used in CAGD, CG, and CNC. This paper presents an algorithm to compute a certified approximation to a given parametric space curve with cubic B-spline curves. By certified, we mean that the approximation can approximate the given curve to any given pr…
The study classifies singularities of spherical orthotomic curves.
problem Classifying singularities of spherical orthotomic curves.
method Defining spherical orthotomic curves and classifying their singularities.
result Singularities of spherical orthotomic curves are classified.
Flow deforms locally convex curves to curves of constant k-order width.
problem Evolve locally convex curves to curves of constant k-order width.
method Introduced a nonlocal curvature flow to evolve locally convex curves in the plane.
result The flow converges to a smooth, locally convex curve of constant k-order width as time goes to infinity.
Modified curve shortening flow constructs λ-Angenent curve.
problem Constructing λ-Angenent curve. method Modified curve shortening flow
result Constructs λ-Angenent curve. Study on CR curves in 3-sphere, focusing on critical curves integration and existence.
problem Addressing the integration and existence of critical curves in the CR 3-sphere.
method Provided a procedure for the explicit integration of general critical curves and characterized closed curves.
result Existence of infinite countably many closed critical curves.
Study rectifying curves in 3D multiplicative Euclidean space.
problem Investigate rectifying curves in a non-Newtonian geometry setting.
method Apply multiplicative differential-geometric concepts to rectifying curves.
result Classify multiplicative rectifying curves using spherical curves.
In classical curve theory, the geometry of a curve in three dimensions is essentially characterized by their invariants, curvature and torsion. When they are given, the problem of finding a corresponding curve is known as 'solving natural equations'. Explicit solutions are known only for a handful of curve classes, inc…
The paper characterizes pedal curves of quadratic curves.
problem Understanding pedal curves of quadratic curves.
method Analyzing the inverse construction of pedal curves.
result Characterization of pedal curves of quadratic curves.
Unified description of aesthetic curves through self-affinities.
problem Characterizing log-aesthetic curves and their properties.
method Reformulating and proving self-affinities of planar curves, integrating equiaffine geometry.
result Unified characterization of constant curvature curves in similarity and equiaffine geometries.
Primitive curves in handlebodies form a connected complex.
problem Understanding the structure of curves in handlebodies.
method Defining and analyzing primitive curves and constructing sequences between them.
result The primitive curve complex for a handlebody is connected.
Study on Bertrand lightcone framed curves in Lorentz-Minkowski 3-space.
problem Analyzing mixed types of curves with singular points in Lorentz-Minkowski 3-space.
method Using lightcone frame to consider Bertrand types for lightcone framed curves.
result Existence conditions of Bertrand lightcone framed curves in all cases.
Study isotopy of rational cuspidal curves in 4-manifolds.
problem Isotopy of rational cuspidal curves in 4-manifolds.
method Tame symplectic curves, pseudo-holomorphic curves, log pairs, 4-dimensional topology.
result Every rational cuspidal curve is isotopic to a complex curve in degrees up to 5.
Defines new curves from tangent indicatrix of curves, linking them to helices and slant helices.
problem Understanding and constructing helices and slant helices from spherical curves.
method Defining integral curves of Frenet vectors and using their curvatures.
result Established relationships and methods to create helices and slant helices from specific spherical curves.
In this study, we introduce a new type of surface curves called D-type curve. This curve is defined by the property that the unit Darboux vector W0 of a space curve r(s) and unit surface normal n along the curve r(s) satisfy the condition <n,W0>=constant. We point out that a D-type curve is a geodesic curve or an asymp…
Study on triharmonic curves in f-Kenmotsu manifolds.
problem Characterizing triharmonic curves in f-Kenmotsu manifolds.
method Investigation of necessary and sufficient conditions for Frenet curves, slant, and Legendre curves to be triharmonic. Proof of specific properties of triharmonic Frenet curves.
result Triharmonic Frenet curves with constant curvature are Frenet helices in three dimensional f-Kenmotsu manifolds.
The paper generalizes rectifying and normal curves in Lorentzian n-space.
problem Characterizing and classifying g−rectifying and g−normal curves in Lorentzian n-space. method Introducing a g−position vector field and defining g−rectifying and g−normal curves based on this field. result Comprehensive characterization and classification of g−rectifying and g−normal curves. New findings on hyperbolicity of fine curve graphs and their subgraphs.
problem Investigating hyperbolicity of fine curve graphs and their subgraphs.
method Analyzing large subgraphs of fine curve graphs and computing distances in specific cases.
result Large subgraphs of fine curve graphs contain flats of every finite dimension, indicating they are not hyperbolic.
In this paper we study null Bertrand curves in R14 under the assumption the curve has a Cartan frame. We show that if the derivative vectors of the null Cartan curve in R14 is linearly independent, then this curve is not a Bertrand curve. Since then the already known notion of null Bertrand curves in $R…
Study of p-biharmonic curves and their properties.
problem Generalizing biharmonic curves to p-biharmonic curves. method Classification and analysis of p-biharmonic curves on surfaces and space forms. result Existence and stability of p-biharmonic curves on closed surfaces. Compact curve solution emerges from non-compact curve.
problem Constructing solutions from non-compact curves.
method Slingshot solution to curve shortening flow.
result Compact embedded solution exists for a finite time.
Homotopy types of curve and arc complexes are studied.
problem Understanding the homotopy types of curve and arc complexes.
method Proving homotopy equivalence and contractibility of complexes.
result Fine curve complex is homotopy equivalent to curve complex, fine arc complex is contractible.
New curves generalize helix and rectifying curves.
problem Generalizing helix and rectifying curves.
method Introducing f-rectifying curves with f-position vector in rectifying plane.
result Classification and characterization of f-rectifying curves.
In this study, we define a new type of direction curves in the Euclidean 3-space such as osculating-direction curve. We give the characterizations for these curves. Moreover, we obtain the relationships between osculating direction curves and some special curves such as helix, slant helix or rectifying curves.
We classify curves in the moduli space of curves that are both Shimura- and Teichmueller curves: Except for the moduli space of genus one curves there is only a single such curve. We start with a Hodge-theoretic description of Shimura curves and of Teichmueller curves that reveals similarities and differences of the tw…
In this paper we consider the idea of Bertrand curves for curves lying on surfaces and by considering the Darboux frames of them we define these curves as Bertrand D-curves and give the characterizations for these curves. We also find the relations between the geodesic curvatures, the normal curvatures and the geodesic…
The paper studies a curve flow preserving anisotropic length for convex curves, leading to a homothetic limit.
problem Anisotropic length preservation in curve deformation.
method A curve flow that maintains anisotropic length, analyzed for convex closed curves.
result Convex curves evolve to homothetic limits of Wulff shapes as time approaches infinity.
Characterizes covers using simple closed curves on surfaces.
problem Tackles the equivalence of covers via simple closed curves.
method Uses Teichmüller theory and the complex of curves.
result Two covers are equivalent if and only if the same curves lift to simple curves.
Characterizes spherical and plane curves using RM frames.
problem Understanding the geometric properties of curves in different spaces.
method Employing rotation minimizing frames to study curvature and torsion.
result Characterizes curves as those whose position vector lies on a moving plane.
Rectangular peg problem solved for many curves.
problem Rectangular peg problem for continuous Jordan curves.
method Microlocal sheaf theory and recent work of Greene and Lobb.
result Affirmative answer for a large class of rectifiable curves.
We study pairs of curves with Poncelet's porism properties and compute their vertex curves.
problem Understanding pairs of curves with Poncelet's porism properties.
method Developed formulas to compute vertex curves for given envelope curves and vice versa, for all sufficiently regular pairs of Poncelet curves.
result Formulas produce all possible sufficiently regular pairs of Poncelet curves, including sets of curves analogous to pencils of conic sections.